Bypass & Full Retention Separators

ECS offers a full range of Separators for varying uses and applications

• Bypass Separators – for areas of low-risk spillage such as car parks

• Full Retention Separators – for areas of high-risk spillage such as haulage yards and refuelling areas

• Forecourt Separators

• Vehicle Wash Separators (also see our Siltceptor page within the Waste Water section of this website)

• Grease Separators – See Waste Water Products tab for a selection of grease-related products

Our Class 1 Separators are designed to achieve a concentration of less than 5mg/Litre of oil under standard test conditions and are suitable for discharge to surface water drains. Class 2 Separators are designed to achieve a concentration of less than 100mg/Litre of oil under standard test conditions and are suitable for dealing with discharges to the foul sewer. If in doubt, ASK a member of our experienced team for guidance.

Mains powered hydrocarbon alarms are available from stock, with solar powered units (with a battery back up) available upon request.

These alarms are a legal requirement in line with PPG3 (Pollution Prevention Guidelines).